Netgear WGR614v6 No CD Required

Manual can be found here

http://kbserver.netgear.com/pdf/wgr614v6_ref_man_20Apr05.pdf

Logging in(first time)

1. Connect the modem into the internet/wan port of the router. (The port that is closest to the antenna.)
2. Connect your computer into any of the lan ports on the router.
3. Plug the power cable into the router.
4. You should see 3 lights on the router (power, internet and lan connection).
5. Now, take out the power cable from the router and from the modem also. And plug the power back to the router, just to the router.
6. You should see 2 lights on the router (power and lan connection).
7. Open Internet explorer and in the address box type http://www.routerlogin.com/basicsetting.htm and hit enter.
8. user name is:admin / password is: password

After you are logged in,

page 27 in manual seems to be helpful

Before you do too much, you may want to update the firmware in the router.
Go to
http://kbserver.netgear.com/products/wgr614v6.asp
and download the latest firmware and install it, could make your setup go easier.

Remember to give the router the name you want

Broadcast SSID

Enable WPA-Personal Security



If you feel that you need the CD, it can be downloaded here

http://kbserver.netgear.com/kb_web_files/n101649.asp

If you are using this with Verizon DSL or a Westell modem/router you may have to change the ip address of the Netgear router.

Please follow the steps to change the ip address of the Netgear router.

1. Connect the modem into the internet/wan port of the router. (The port that is closest to the antenna.)
2. Connect your computer into any of the lan ports on the router.
3. Plug the power cable into the router.
4. You should see 3 lights on the router (power, internet and lan connection).
5. Now, take out the power cable from the router and from the modem also. And plug the power back to the router, just to the router.
6. You should see 2 lights on the router (power and lan connection).
7. Open Internet explorer and in the address box type http://192.168.1.1/basicsetting.htm or http://www.routerlogin.com/basicsetting.htm and hit enter.
8. This will take you to the basic settings page of the router.
9. Click on apply button on the bottom.
10. Login to the router (User Name = admin Password = password unless you have changed it).
11. Click on LAN IP SETUP on the left hand side.
12. Change the lan ip address or local ip address to 192.168.7.1 and click on apply.
13. This will give you page cannot be displayed.
14. Now, connect take out the power cable form the router.
15. Plug the power cable to the modem and wait for the modem to come up properly, and when the modem is up then plug the power cable to the router.
16. Go back to the computer and try to access the Internet.

You can use the setup wizard or manually configure it yourself.