dell axim x3i
by jdukate - 8/7/11 5:17 PM
In Reply to: DELL AXIM X30 SD Card Problems by NANAKOJO
I got tired of searching and searching the internet so I took apart my X3I and I noticed that 2 of the prongs in the card accepter had been bent so I bent them back and put the sd card back in btw its a 2GB sd card and it recognized it.If you wish to do the same take the rubber feet out of each of the four corners and inside each hole there is a screw after all four screws have been taken out pop the back plate of and you will be able to see the sd card accepter inside I suggest putting the sd card in so you do not over bend the prongs best of luck. JOSH

Moderator
CNET Staff
Samsung Staff
Dell Staff