NO DRIVERS?
by fixit85 - 12/31/06 1:05 AM
In Reply to: Drivers by gman1243
Hi everyone
I have been following the subject about the "Innovage" digital cammera and have been so far,perplexed by the apparent difficulty by everyone in getting the software to work.
I recieved one of these digital gems for Christmas this year and have had no problem with it after I figured out how to use the appropriate software layers.
Here is how you do it:
1) Unpack the Camera,USB Cable,User Manual {READ THIS you will NEED IT!} and enclosed disk....DUH!!! guess what?.. the disk is where the evasive driver software is people...
2) Install the drivers first and then install the photo software......By the way, DO NOT connect the Camera until the drivers are loaded,otherwise the Cam WILL lock up and NOT WORK AT ALL!!
2B) If anyone did connect the Camera before loading the software you will now need to un-install the drivers and start over.
3) To use the cam as a "Web-Cam" one must hit the play button (forward arrow) on your screen.
Good luck and if anybody has any questions pls feel free to contact me at "fixit850@yahoo.com"
Was this reply helpful? (0) (0)
Staff pick