Intel RAID Problem / Questions
by azjazz - 11/17/10 10:00 AM
I just had a really weird problem occur.
I was cleaning dust out of my Win7x64 Asus P6T Deluxe V2 water-cooled system and refilling my coolant tank. To get the liquid level down, I turned on my system for a few seconds to turn the pump power on, then I turned power off. I didn't let the system get through BIOS bootup.
When I rebooted my system again, I got a "Hit F1 for Setup, F2 to load defaults" BIOS message, and my clock speed looked like it was set back to defaults.
Rather than hit either F1 or F2, I powered the system down again. When I rebooted once again, my system was set back to my normal configuration with my normal boosted CPU and memory speeds.
However, as the system bootup continued, I saw that the Intel RAID controller status showed my 1.5TB RAID5 array as "Degraded" and my 0.5TB RAID0 array as "Failed".
At first, I figured that I must have accidentally disconnected a SATA cable while messing around in the case. However ...
My system booted up successfully (And, boy, did THAT take a long time), and the Intel Matrix Storage Console shows all 3 hard drives as connected.
So, none of the cables got disconnected. And, the IMSC is currently rebuilding my RAID5 array, but my RAID0 drive does not show up in my Windows connected drives anymore (though, it shows up in the IMSC RAID tree).
1) Did my resetting of my BIOS during startup cause the RAID corruption? Or, was it something else? My system never got to the point of accessing my hard drives during that first reset, so I am confused as to how this would have been the problem. I'd also like to think that the system is more robust: I have reset my system numerous times before in the middle of BIOS startup, and haven't seen this RAID corruption ever happen before.
2) Will the Intel Matrix Manager be able to recover my RAID0 data? It does show that option on the RAID0 array in the console, but I haven't enabled it yet - I want my primary RAID5 array to get fully rebuilt before I try messing with the RAID0 array.