Storage forum: Intel RAID Problem / Questions

by: azjazz November 17, 2010 10:00 AM PST

Like this

0 people like this thread

Staff pick

Intel RAID Problem / Questions

by azjazz - 11/17/10 10:00 AM

I just had a really weird problem occur.

I was cleaning dust out of my Win7x64 Asus P6T Deluxe V2 water-cooled system and refilling my coolant tank. To get the liquid level down, I turned on my system for a few seconds to turn the pump power on, then I turned power off. I didn't let the system get through BIOS bootup.

When I rebooted my system again, I got a "Hit F1 for Setup, F2 to load defaults" BIOS message, and my clock speed looked like it was set back to defaults.

Rather than hit either F1 or F2, I powered the system down again. When I rebooted once again, my system was set back to my normal configuration with my normal boosted CPU and memory speeds.

However, as the system bootup continued, I saw that the Intel RAID controller status showed my 1.5TB RAID5 array as "Degraded" and my 0.5TB RAID0 array as "Failed".

At first, I figured that I must have accidentally disconnected a SATA cable while messing around in the case. However ...

My system booted up successfully (And, boy, did THAT take a long time), and the Intel Matrix Storage Console shows all 3 hard drives as connected.

So, none of the cables got disconnected. And, the IMSC is currently rebuilding my RAID5 array, but my RAID0 drive does not show up in my Windows connected drives anymore (though, it shows up in the IMSC RAID tree).

Questions:

1) Did my resetting of my BIOS during startup cause the RAID corruption? Or, was it something else? My system never got to the point of accessing my hard drives during that first reset, so I am confused as to how this would have been the problem. I'd also like to think that the system is more robust: I have reset my system numerous times before in the middle of BIOS startup, and haven't seen this RAID corruption ever happen before.

2) Will the Intel Matrix Manager be able to recover my RAID0 data? It does show that option on the RAID0 array in the console, but I haven't enabled it yet - I want my primary RAID5 array to get fully rebuilt before I try messing with the RAID0 array.

Thanks,

AzJazz

Forum Icon Legend

  • UnreadUnread
  • ReadRead
  • Locked threadLocked thread
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  • ModeratorModerator
  • CNET StaffCNET Staff
  • Samsung StaffSamsung Staff
  • Norton Authorized Support TeamNorton Authorized Support Team
  • AVG StaffAVG Staff
  • avast! Staffavast! Staff
  • Webroot Support TeamWebroot Support Team
  • Acer Customer Experience TeamAcer Customer Experience Team
  • Windows Outreach TeamWindows Outreach Team
  • DISH staffDISH staff
  • Dell StaffDell Staff
  • Intel StaffIntel Staff
  • QuestionQuestion
  • Resolved questionResolved question
  • General discussionGeneral discussion
  • TipTip
  • Alert or warningAlert or warning
  • PraisePraise
  • RantRant

You are e-mailing the following post: Post Subject

Your e-mail address is used only to let the recipient know who sent the e-mail and in case of transmission error. Neither your address nor the recipient's address will be used for any other purpose.

Sorry, there was a problem emailing this post. Please try again.

Submit Email Cancel

Thank you. Sent email to

Close

Thank you. Sent email to

Close

You are reporting the following post: Post Subject

If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed.

Offensive: Sexually explicit or offensive language

Spam: Advertisements or commercial links

Disruptive posting: Flaming or offending other users

Illegal activities: Promote cracked software, or other illegal content

Sorry, there was a problem submitting your post. Please try again.

Submit Report Cancel

Your message has been submitted and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.

Close

Your message has been submitted and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.

Close

You are posting a reply to: Post Subject

The posting of advertisements, profanity, or personal attacks is prohibited. Please refer to the CNET Forums policies for details. All submitted content is subject to CBS Interactive Site Terms of Use.

You are currently tracking this discussion. Click here to manage your tracked discussions.

If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended.

Sorry, there was a problem submitting your post. Please try again.

Sorry, there was a problem generating the preview. Please try again.

Duplicate posts are not allowed in the forums. Please edit your post and submit again.

Submit Reply Preview Cancel

Thank you, , your post has been submitted and will appear on our site shortly.

Close