How do you know if a hard drive is compatible?
by monkeysateme - 11/15/05 3:32 PM
Ho shall I know if a hard drive is compatible with my computer?
by: monkeysateme November 15, 2005 3:32 PM PST
0 people like this thread
Total posts: 27 (Showing page 1 of 1)
ide, sata, or scsi....
that generally narrows it down, it depends on what controllers you have on your motherboard. ide controller, ide compatable hard drive. i might be generalizing, but that should get you started in the right direction
Is there a good online tutorial for this?
Is there an online tutorial with all the info i need to know about replacing a hard drive?
I found out...
it's IDE, is that all i need to know?
For larger HDs, your system BIOS and operating system need to support the largeer size.
How do I know if a hard drive is an IDE?
Well, how do I know?
How do you know?
Read the description of the hard drive. Read its specifications.
Alot of them don't specify
Alot of them don't specify
The specifications for the HD on the retail box or online will tell you enough information. If you are looking at your old hard drive, the model number on the drive is enough to do a search online. You can also get the name and model number from Windows utilities like Belarc Advisor, Everest Home Edition, and the built-in System Information utility in Windows XP.
Do you have a link to an example? Can you provide the model number of the current HD?
There are tutorials everywhere. Hard drive mfgs. and system makers usually have nice tutorials with pictures. New HD's in retail packages also have quick installation guide. Check first with on the computer mfg's website to see how to change the drive for your particular computer model.
What is the mfg and model number of the computer?
I meant one that had all of the info about compatibility
What's an MFG?
Hard drives (HD) have been around for decades, and there is a long history of development and compatibility. Therefore, you aren't going to find a concise tutorial on all the different HD technologies. You would be reading a good sized technical manual. Circusjojo gave you a good start on the 3 main technologies of the past decade--SCSI, IDE, and SATA.
SCSI historically has been the HD for servers and Macintosh computers. Macs switched over to IDE drives on many of their machines in the mid 1990's.
IDE drives historically have been in MS Windows machines. The term ''IDE'' is often misused because it encompases a large area of technology (not just one type of hard drive and not just hard drives). Many use the term ''IDE'' to mean any Parallel ATA (PATA) HD and not SATA and not SCSI.
SATA or Serial ATA is a newer technology that would not be found in a computer as old as yours.
A good way to approach it is to find out what type of HD is currently in the computer and then get one of those. Your computer seems to be a Windows machine from 1999. AMD processor 350MHz? Anyway, it would have a PATA HD. Maybe it is an early EIDE drive or possibly an ATA/33 or ATA/66 drive at the fastest.
TO GET ANSWERS HERE, YOU NEED TO PROVIDE MORE INFO:
Download and run Belarc Advisor and tell us what the full name of your IBM E4N is. Tell us the motherboard (system board) model mumber. Tell us the make and model of your current HD.
I have IDE ATA/ATAPI controllers
and the hard drive I have now is a Maxtor 90840D5
I am also considering building a computer from scratch, but I need a way to know if everything is compatible. Are there some guides where it tells you what kind of video cards work on what kind of motherboard, what kind of ram works, etc..
Quick search on the internet for Maxtor 90840D5:
33.3MB/s = ATA/33 (Ultra ATA 33MB/s)
Buffer (cache) Size: 256KB
Rotational Speed: 5400rpm
This means that it is extremely likely that you will have a BIOS problem with upgrading the current machine with a larger HD. You will be limited to an 8.4GB or 32GB maximum HD with the motherboard.
Today's mainstream PC drives are:
Much larger (typically 80GB to 400GB)
ATA/100, ATA/133, SATA 150, SATA 300/II
8MB cache or larger
7200rpm or faster
I think you are wise not to upgrade, but start anew. Either buy new or build. Everyone I know who builds one finds it to be quite rewarding (myself included). For the most part, they don't want to buy a prebuilt machine ever again, unless it is a fantastic deal.
''build your own pc''
Search CNet forums:
''build your own''
The first thing you need to ask yourself is how you will use the computer. Gaming, high-end gaming, video editing, graphic design, programming, word processing browsing and email, general use, accounting, CAD, etc. That will lead you to a CPU choice. Everything will start to fall into place when you search for a motherboard that is compatible with your CPU.
If you have never even upgraded a PC before, you need to do a little reading. You can do this online or get a book like this one:
(No insult intended with the ''Dummies'' book. They are fantastic resources.)
If you want recommendations for websites that have good step-by-step instructions on what to do, I strongly suggest creating a new discussion (the green button), rather than burying that request in this discussion about hard drives. You will get a lot of suggestions. Make sure you post what you want to be able to do with your new computer.
Hope this helps.
I ahve googled and searched cnet, but Google gives me a bunch of sites from 98 and they don't talk about compatibility. Cnet's build your own computer didn't talk about a motherboard.
Found this discussion interesting, and may someday soon be faced with the same situation. My Dell is on its last year renewable warranty and about to expire, and my HD is going to be 4 yrs old. I would like to also put in a bigger and faster HD before the oem drive starts to act up. I have a Dell Dimension 8200 with a 40gb drive and a little interest adding another drive and also maybe building my own system some day. You recommended to "monkeysateme" to start a new discussion, if they did that, where would one find that discussion?
Go to the CNet Forums home page:
Click the forum in which you wish to start a new discussion. Click the Create New Discussion button at the top of the forum. Your discussion topic will appear at the top of that particular forum. Everytime a new reply is posted to your discussion, the entire discussion gets bumped to the top of the list for that particular forum.
You can see all of your forum posts and discussions by looking at your profile
More info from the CNet forum FAQ:
I may of not have been clear so I will try again. What I was asking was, if "monkeysateme" decided to start a new discussion as you recommended to him, to inquire about building a new system how could this new discussion be discovered or followed? Could a new discussion or all discussions by a particular member be tracked by anyone other than themselves? I would like to follow his situation and questions because they would be similar to my mine.
I made another discussion
I have made some new ones click on my name and you will get my profile and from there go to "my posts" It will show all the posts I have made.
Sup! my name is Waqas. I was wondering what kind of hard drive would need because I want to upgrade my hard drive. I download the Belarc Advisor it telling this HDS728080PLA380 [Hard drive] (66.63 GB) -- drive 0, s/n PF2H27SWUTLVWY, rev PF2OA69A, SMART Status: Healthy
(NT) (NT) mfg. = manufacturer
(NT) (NT) also, what operating system is the computer running?
Question about pin connection on hard drives
I'm old school in that I'm used to seeing the multiple pin (39 pins) connection on hard drives. I recently bought a new Dell and thought I would take a 160GB drive I had in a drawer and upgrade the machine but when I opened it up it was clear from the size of the cable and the plug that there are far fewer pins required for the hard drive on this machine. What's the story on this??????
(NT) SATA or SATA 3Gb/s
i'm in the market for a new custom computer but i have one question i need answered before i continue. I've been looking at motherboards that have a SATA 3Gb/s controler, i have found some hard drives for that controler, but the hard drive that i want as the boot drive does not come in SATA 3Gb/s. My question is will a SATA hard drive run in a SATA 3Gb/s controler like the USB 1.1 and USB 2, or should i just wait for the SATA 3Gb/s version of that hard drive to be released?
For you reference the drive that i'm refering to is the WD Raptor 74GB and the motherboard that i have my eye on is the ASUS A8N-E.
how do I know if a hard drive is compatable with my computer
I have a Toshiba Equium 7100. It is a great computer. However I tried to put a new scsi hard drive in and computer would not recognize it. I tried to boot up from my windows boot disk. I have windows xp professional service pack II. I was told I don't need the format diskette. I was told to just put the operating disk in and it will load up. any truth in that. Could I make it a slave?
hd went code purple
hi guys i need help
i built a new pc last month and i used my old hd i restored it to factory setting when i booted it up it went to code purple and went bad bad according to compaq. which is np b/c i own and another hd when trying to add this hd its refusing to load windows with a giant word that says failed. idk what to do i dont have enough money to buy 1 or take it to the shop plzzzzz can ne 1 help me ive looked all over the internet. the hd is coming from a dell e521
Total posts: 27 (Showing page 1 of 1)