How to get rid of a bot
by Fish - 7/9/13 4:31 AM
Comcast warns me that I may have a bot on my pc.
How can I detect and remove it?
by: Fish July 9, 2013 4:31 AM PDT
0 people like this thread
Total posts: 20 (Showing page 1 of 1)
><)))> ... Did you run any scans?
I can't say I know much about their warning system, short of an article I read by Brian Krebs when Comcast first announced the program. See Comcast Pushes Bot Alert Program Nationwide.
Did you run any scans?
According to one forum, Comcast provides a link for their customers to check where the suspicious activity is coming from. See Am I Botted?
As I stated, I'm not familiar with the program. The Comcast Forum has quite a few threads on the topic. (See these )
If you don't get any further help here, you might want to consider posting there. But.. if you haven't run any scans, I would consider it the first order of business.
It's the best I know to suggest..
Carol. I ran MS emergency responce tool and it did find ( Trojan:DOS/Alureon.A
They only partially removed it and gave suggested steps for removal.
I'll read some of your links here for futher understanding before doing anything else.
Thanks for the info " Cat "
Fish, was Kaspersky's TDSSKiller part of the suggested removal steps? If you run into a problem, give it a try.
Kaspersky's TDSSKiller - Instructions are listed below. (Additional instructions can be found here)
Carol, TDSSKILLER tool took care of my posted problem and a few others not posted that were mentioned
in your post for Comcast forums. A big high five to you lady! Fish
Spoke too soon!
My two dvd drives are missing. I updated and ran my antivirus and TDSSKiller as suggested from googled site to no avail. They don't show and don't work.
Look in device manager. Any "Code 19" or such?
If so, try the usual. But I don't see which OS (I missed it?) so I'll wait for a little more detail.
No code 19
Using xp Home Service Pk 3
No code 19 or any other messages. I'v run fully updated antivirus scans as previously mentioned that found and quarrenteened virus's.Did restart and reran anti virus.
The drive may be dead. It's odd to see it in the device manager and not show in My Computer unless there's an error code.
Try the usual and in safe mode, remove them in device manager, reboot and see if they come back.
XP's upper and lower filter issue (Hey, MSFT, still no fix over a decade later? and why is this still a problem at all?) is noted at link to follow.
Bob, I guess I'm not clear to you.
Neither of my dvd drives show or are recognized anywhere on my computer.
They have vanished! Not in my computer, not in device manager and are not listed in Belarc Advisor report.
Let's say what you write is true. The drives don't show in BIOS, device manager, Windows or anywhere.
Then I'd open the case after power down to check if the cables are snug at both ends and the drive eject buttons work after a power up.
There are older machines I can cause the drives to vanish with a default BIOS setting but I'm sure you don't have an Acom 6448 Black Beauty.
I did'nt mention Bios.
This is what I see in Bios.
Drive 0 sata-0
Drive 1 sata-1
Drive 2 sata-2
Drive 3 sata-3
Drive 4 pata-0
I have no idea what anything in there means. Amature here.
"Neither of my dvd drives show or are recognized anywhere on my computer."
You used the word anywhere so that includes the BIOS as well.
Not everyone is going to be an expert in all things PC so when you reach the end you reach out for help, get your PC guru over or take it in for repair.
eject buttons and green light has worked all along.
I will open the case and check the cables and post back soon.
I did find one ribbon half unseated. Snugged it up and checked every other connection I could .
Alas, still not detected. I thought sure that loose ribbon was going to be the answer.
I use sonic solutions drive recognition version 188.8.131.52 which is not compatable with ie8.
Can this cause my situation?
It unplugs the drives. Said apps so far will not disable the drives in the bios or keep them from showing in the BIOS.
OK how old is everything?
IDE ports do die, drives as well but can you pull the optical and try it on some cable test like this one?
This is what I use when I suspect a drive.
About 8yrs old.
Since my first posting , I today ran Microsoft saftey tool again and it found Trojan:win32/Alureon.fw and partially removed it.Now it needs to be manually finnished. Any helpful ideas here?
I'm not there so I can't do the work I normally do. As in the usual noted by Carol and Grif as well as tests I do on the machine and drives.
For example one of my ACID TESTS is to pull out a bootable CD (doesn't matter which) and if the machine can't boot from any CD that's my clue the drive is gone. Yes we can try lens cleaners but the FACT THE DRIVE IS NOT SHOWING IN THE BIOS is >damming<.
If you can't boot from the CD, any CD then we fix that as during boot, there is no trojan known that runs at that time.
Total posts: 20 (Showing page 1 of 1)
You are posting a reply to: Post Subject
You are requesting a clarification of the question: Post Subject
You are posting an answer to the question: Post Subject
Would you like to resolve this question? close