I want to drop my land line and use one of my "Family Talk" lines as my home phone number. However with young children and teenagers in the house, I prefer to use my current home phone system (wireless) to reduce their exposure to cell phone radiation. (http://www.independent.co.uk/life-style/health-and-wellbeing/health-news/mobile-phones-more-dangerous-than-smoking-802602.html)
Is there a device on the market that will convert an incoming/outgoing cell phone signal through a traditional land line? It should connect through some means to a standard land line rj12 telco cable to interface with any land line system.
I have a magicjack in place already, but if I have to keep the cell phone for emergencies (i.e. loss of power or isp.), it makes more sense to maximize the cell phone while addressing the health concerns associated with excessive cell phone use in adolescents and teen agers.
Any help with this issue would certainly be of great help to me and probably to a lot of other folks too.
What exactly is "family talk"? And what is your ideal configuration of family talk, traditional land line, wired phone, classic wireless phone (DECT), and cell phone? I don't understand what you want to reach, although right now I'm afraid it can't be done.
Kees
Thank you for your response I will clarify. With my current AT&T wireless plan - "Family Talk" we have five telephones sharing 1400 minutes per month with about 3400 rollover minutes.
At home we are using the VOIP phone offered by our ISP cable provider. I want to drop the VOIP. It works obtensively like a regular land line. A standard telco jack connect to the cable modem on one end and to the base unit of a three phone cordless system on the other.
I want to use one of the AT&T lines that I am already paying for and replace the VOIP cable modem connection - then drop the VOIP altogether. Most importantly I want to answer and place calls in my home using a low intensity radio frequency cordless phone and not a high intensity microwave frequency cell phone.
I would find it incredibly odd if I am the only person looking for a hybrid - in home - cell phone to land line translator of this type.
Uh... It depends on your carrier, but your cell phone probably operates in the 800 MHz band and unless it's very, very old, your cordless phone operates at 2.4 GHz, 1.8 GHz or 5.8 GHz.
So if you're worried about the supposed dangers of microwave radiation, it's more likely to come from your cordless phone than your cell phone.
To be fair, though, cell phones often transmit with slightly higher power than cordless phones, though unlike most cordless phones, cell phones can reduce their power when they're close to the cell tower.
T-Mobile has the 'hotspot at home' program that has a wireless router and they also have a v-tech cordless phone that can be used with the system. go to tmobile . com and look up hotspot at home.
you'll have to change services but at least your kids brains wont be fried.
This brings me right back to the VOIP solution I wanted to circumvent. If I have to keep the cell phone anyway as a back up for the VOIP in case of power loss or ISP service outage, then I have not resolved the need to eliminate my existing VOIP - I'd just be swapping one for another. I might as well keep the magicjack.
Thanks for your response and I appreciate your input.
Good luck with that, because I suspect you're either going to have to roll your own solution or give up on the idea entirely.
Also, I'm not really a big believer in all of this cell phone radiation stuff. For about the past 50 years or so there have been very high energy TV signals being broadcast 24/7, and for even longer than that, there have been high energy radio signals being broadcast 24/7. The output of these signals is measured in Megawatts, and sometimes Gigawatts. Over the air TV signals have a very innate property in that they can permeate almost any structure with ease.
Anyway, anyone still alive today has been subject to bathing in this high energy EM radiation for most of, if not our entire, lives. I suspect that if they've failed to find any kind of link between these signals and negative health effects, that cell phones (which are hundreds of times weaker) are unlikely to be succeeding where everything else has failed.
Which isn't to say that they don't have a sociological and even psychological impact on people. It makes it even easier for us to be contacted no matter where we are, so it's that much harder for us to "get away" and have a little time for ourselves. THAT can have a profound impact on people's behavior. Making us more prone to the various physical results of, for example, stress, which can induce ulcers.
Anyway, getting back to your question... I think your best bet would be to try and get some kind of bluetooth adapter that can plug into an RJ-45 jack. I have no idea if such a beast exists, but you could potentially get an electronics geek to do some rewiring of a VoIP phone.
You might also be able to retrofit some bluetooth adapter into the casing of a regular phone. It would probably have to be corded, since bluetooth doesn't have the same range as cordless phones.
Ultimately, I'd say it's better to just pay the extra money to have a land line. Think of it as a safety precaution, in case all cell service is lost and you need to call an ambulance or something. Because there's no way to escape cell phone radiation... Even if you're not holding them to your head, they're still communicating with the nearest base tower. So just being within the same domicile as a cell phone means you will be exposed to some of its radiation. It's an omni-directional transmission, and it has to be strong enough to reach the nearest tower. Maybe Bob knows about how far apart the towers should be for maximum coverage, but I'd estimate one every 3-4 miles.
If you do come up with something, be sure to post back. I'd find it interesting to hear about on a purely intellectual level.
Wow! That was some post! I am still holding out hope that some innovative entrepreneurial answer is just waiting to be discovered.
In any event, to respond to your tangential point - none of the cases you stated to support the safety of cell phone radiation or high energy radio transmissions - places the signal transmitter directly touching the human head for prolonged periods of time.
There is no question within the cell phone industry that the brain is heated by the microwave cell phone transmissions in the area immediately surrounding the device when the phone is held to the ear. What is still undetermined and up for debate are the medical ramifications of such exposure over time.
Hi there,
I came across your post while searching for the same info that you're looking for. It seems that there are a few devices that convert cell phones for landline usage. Some are only compatible with certain models, and others are compatible with bluetooth enabled phones. The devices are a little expensive, and I'm still looking for something cheaper that matches my phone. You can search google for cell phone docking. Here are a couple of the ones I've found.
Xlink
Dock-n-talk
RCA 23200
Good luck, hope you find what you're looking for (and hope I do too ![]()
Check out eBay listing of product "U118" for much less then XLink & Dock-N-Talk, it is also a bluetooth cellular gateway that works with your existing house phone.
Hope it helps.
The U118 is cheaper but doesn't work as well.... doesn't work with call waitting ... it can link to 3 cell phones but only the 1st work that comes into your home links up ... not like the XLink where all 3 work at the same time etc...
I too am looking for a bluetooth cell to home phone solution without a land line. I have researched both the products you mentioned and almost ordered the U118 today until I came across your post.
I haven't been able to find any detailed information on either product other than they both were supposed to support 3 phones, but you mentioned the U118 only worked 1 cell phone at a time ...didn't know that. Does the X link allow you to recieve more than 1 call at a time from different cell #'s? If so do you do you simply use a different hand set to answer other calls? How do you know which cell phone is ringing in? Does the X Link have both Call Waiting and CID? And how do you send or answer calls on your house handsets without dialtone? Yes...all these questions and more...but you seem to know more than anyone else out there and I have tried multiple websites that apparently don't have enough info. One more thing...if you have a house multi phone system such as Cordless W/base staion and 2 satellite phones, will this unit work on all your house phones by simply plugging in the base station? Any help you could give me would be greatly apreciated. Thanks
Hi again--
I came across a website that sells landlines that connect to cells via bluetooth. It's a good starting point for research on the various options--www.smithgear.com. Just search for cell phone docking on the smithgear webpage and various models come up.
good luck again
It seems that no hope is ever lost and there is always someone within reach who can help when asked politely. Kudos!
You say that you have a magicjak. You could just forward one of your family talk #'s to your magicjak phone #. That way any calls going to that cell phone could just be picked up with whatever physical means you are using with the magicjak.
| Forum legend: | |
| Locked thread | |
| Moderator | |
![]() |
CNET staff |
![]() |
Samsung staff |
| Norton Authorized Support team | |
| AVG staff | |
| Windows Outreach team | |
![]() |
Dell staff |
| Intel staff | |