Version: 2008
Advanced Search
advertisement
advertisement

Forum display:

Broadband: Splitting a Cable internet connection

by spokes - 1/10/07 10:31 PM
advertisement
Post 1 of 12

Splitting a Cable internet connection

by spokes - 1/10/07 10:31 PM

Can you split a cable connection to go into two computers that can both be running? If so, what with and would the service be slower or same?

And if you can't do that, is there another way to run two computers (side by side) at the same time. Seems to me there would be conflict in doing this but you never know. thanks

(Windows XP desktop and Mac note book)

Post 2 of 12

Yes, that can be done.

by Kees Bakker Moderator - 1/11/07 1:52 AM In reply to: Splitting a Cable internet connection by spokes

You need a cable modem with an Ethernet connection and a device called a router.

You connect the cable modem with the in-port (WAN-port) of the router and the outgoing ports (LAN-ports) of the router with the Ethernet-connection of the PC's. The usual routers on the consumer market support 4 PC's wired. A wireless router suppports a much larger number of PC's that have a wireless Ethernet receiver (laptops come with it, generally, for desktops you need to buy them separately).

The additional advantage is that the PC's are connected in a home network, so it's possible to share printers and files, if you like. Although this might be difficult between a Mac and a Windows PC, as you have.

It depends on the connection speed of the cable and what the PC's do with it if you'll see a downfall in service. You can't look high-res streaming video (2 Mb/s) on 2 PC's simultaneously if you've got a 2 MB/s connection, of course. But just browsing and mailing and listening to 96 kB/s streaming audio will go very well with 2 PC's and a 2 Mb/s broadband.

You'll find a wired router for some $50 to $60 in any computershop. It's a very common setup. Every shop assistant worth the title will sell you the right equipment and the right cables or cards.

Hope this helps.


Kees

Post 3 of 12

"need cable modem and router"?

by spokes - 1/12/07 11:38 AM In reply to: Yes, that can be done. by Kees Bakker Moderator

Just out of curiousity, could I also split the cable into two computers with only a "router"?

thanks

Post 4 of 12

You need both.

by Stan Chambers - 1/12/07 12:46 PM In reply to: "need cable modem and router"? by spokes

You should already have the modem. It is typically installed by the ISP when you purchase their service. Motorola Surfboard or some such modem.

Post 5 of 12

Got it, but one more question

by spokes - 1/13/07 4:57 PM In reply to: You need both. by Stan Chambers

If it's not a cable wire and it's (I'm not sure I know the name) one of those ..... it's very much like a phone jack line/connector BUT it's much larger and the cable w/ it is round and bigger than a regular phone line.

Here's some numbers off of it (sometimes this is done in a hotel but mine is in an apartment):

24AWGx4P Type CM<UL> CMH E164469- F3 0990FT IC NETWORK UTP CAT 5E 350MHZ ISO/IEC (and it just keeps on going:) this was on this cable.

Can that be split, that kind? or same thing. Thanks a bunch, appreciate it. (no more questions) (I be done)

Post 6 of 12

Nope again. . .

by Coryphaeus - 1/14/07 3:23 AM In reply to: Got it, but one more question by spokes

That's the Ethernet cable, fully digital. You cannot split any kind of a digital connection.

Post 7 of 12

Splitting = nope.

by Coryphaeus - 1/13/07 10:59 AM In reply to: "need cable modem and router"? by spokes

When you split the cable your ISP will see two MAC addresses (the specific address of a NIC) and they will not allow that. One MAC address per customer.

Now.

You have to have a modem, period. The modem will have a MAC address, the router does not. It will connect to the router. The router will distribute the connection to up to four wired PCs. It does this by assigning a home network IP address to each NIC/PC.

Wayne

There are 10 types of people who understand binary; those that do and those that don't.
Click here to see the CNet faces, learn a little about analog and
digital data, internet connections, spyware removal, and download free software.

Post 8 of 12

2 modems

by ebaAay - 1/28/07 8:44 AM In reply to: Yes, that can be done. by Kees Bakker Moderator

can i run 2 modems off the one isp line

say i have one computer downstairs which has the modem, can i split the internet connection from the main box and run a separate modem to another computer upstairs

(i currently have wireless router but its very bad connection)

Post 9 of 12

(NT) Read above, splitting = nope.

by Coryphaeus - 1/28/07 9:14 AM In reply to: 2 modems by ebaAay

Post 10 of 12

ok so

by ebaAay - 1/28/07 6:58 PM In reply to: (NT) Read above, splitting = nope. by Coryphaeus

i must run it through the original modem via a router
i currently have a wireless router, will that do the job?
and is it just cat-5 wire?

Post 11 of 12

Simply. . .

by Coryphaeus - 1/30/07 4:40 AM In reply to: ok so by ebaAay

Cable (coax) -> modem -> router (wired/wireless) -> each PC.

Post 12 of 12

routers

by Tulsaboyw - 7/31/08 11:26 AM In reply to: ok so by ebaAay

the main idea for a router for home users is so that they can have more than one pc being on the internet ..

along with that having some sort of home network.

In my own case... I have 2 printers and 2 major device towers on my network...neither hooked to pc's ...

And another pc that is wirelessly hooked up to router too.

Point, there is no real reason to split cables when u can inexpensivley go router based..

More Discussions

Forum legend:
Locked Locked thread
Moderator Moderator
CNET staff CNET staff
Samsung staff Samsung staff
Norton Authorized Support team Norton Authorized Support team
AVG staff AVG staff
Windows Outreach team Windows Outreach team
Dell staff Dell staff
Intel staff Intel staff
Powered by Jive Software